
IoT Hybrid SolutionsKeeping you Connected
All insights
Update
Not Every Cable in a Security Operations Room Gets 100 Meters
A twisted pair channel reaches 100 m, but USB-C and DisplayPort do not. The cable reach checks we run on every operations room takeoff before ordering.
Structured CablingCommand CenterSecurity Design

Most of us know the network number. A twisted pair channel tops out at 100 m (328 ft): up to 90 m of permanent link plus up to 10 m of patch cords.
The operations room is where that habit causes trouble. A video wall and operator desks bring in display and USB cables, and their limits are much shorter.
What we check on every takeoff
- Passive USB-C. About 4 m at USB 2.0 speed, about 1 m at 10 Gbps, and less for USB4.
- Passive DisplayPort. VESA certified DP40 cables are rated to about 2 m and DP80 to about 1 m. Higher resolution means shorter reach.
- Rack to video wall. That run usually needs active optical cable or an extender, and its DisplayPort version has to match the monitor's resolution and refresh rate.
- USB at distance. Use a USB extender over Cat6a instead of stretching a passive cable.
On a recent design, this check flagged two cable types before anything was ordered.
Check signal reach for every cable type, not only the network.
Talk to an engineer
Short call, quick requirements pass, and a recommended next step you can act on.
Contact usIoT Hybrid Solutions LLC | 11400 Airport Rd Suite 200, Everett, WA 98204 | (425) 287-6866 | service@ioths.ai | ioths.ai

